GTC Push Lock S2 4A 5P Panel Rear Mount Male Solder
Categories: Connectors, Sensor Series, USB | HDMI | RJ45 Connectors
GT261201-0305XSpecifications:
Current Rating: 4A
AWG Gauge: 20 AWG ~ 24 AWG
Voltage: 4 PIN: 250V AC/DC
Temperature Range: -25° / +85°
IP Rating: IP 68
Description
Material | |
---|---|
Housing/Base/Cage | PA66 |
Body/Hex Nut/Push Nut/Holder/Cover/Gland Nut | Copper Alloy |
Metal Ball / Spring | SUS |
Contacts | Copper Alloy With Au Plating |
O-Ring/Gasket/Gland | Silicone |
Glue | Epoxy |
Technical Data | |
Characteristics | Description |
Visual and Dimensional Inspection | Must meet or exceed the requirements specified by the most current version of the GT2611 Specification. |
Insulation Resistance | DC500V±10%‚ test for 1 minute and the insulation resistance should be more than 100MΩ |
Withstanding Voltage | 650 VAC between contacts , 650 VAC between contacts and metal-housing, for 1±5s min. |
Contact Resistance | 10mΩ at 10mA Max. |
Pin Pull Test | 1. Initial: 24 N minimum. 2. After Test: 16 N minimum. |
Durability | 2000 cycles insertion/extraction cycles at a maximum rate of 200cycles per hour. |
Physical Shock | No discontinuities of 1 μs or longer duration when mated are subjected to 11 ms duration 30 Gs half-sine shock pulses. Three shocks in each direction applied along three mutually perpendicular planes for a total of 18 shocks. |
Random Vibration | The electrical load conditions shall be 100mA maximum for all contacts. Frequency: 50 to 2000 Hz PDS: 0.04 g? /Hz. Duration: 1 Hour/Axis, 3 Axes Total. g’s: 7.56 g rms |
Thermal Shock | 5 cycles at -40° / +105°, after the test, the function and appearance can’t be impacted. |
Humidity Life | 96 hours minimum (seven step cycles). |
Salt Spray | The test liquid (Nacl) thickness is 5%, Compressing the air pressure is 0.083Mpa, Spraying amount is 1~2 ml/80cm/h, Temperature of the pressure barrel is 43°, LAB temperature is 35°, relative humidity of LAB is 95%~98%, test time is 48hours, after the test, check if there is rusty and oxidized phenomenon. |
Waterproof Test | Submersion in water 1 meter for 24 hours. |
Temperature Life | 85° for 48Hours Method A, Mated |
Cycling Humidity | 4 cycles at 25° / +85° 95%RH (1 cycles/day) | UV Exposure | 24Hr equal 1 year: Total require 3 years 8h UV at 70 (±3) ° Black Panel Temperature 4h Condensation at 50 (±3) ° Black Panel Temperature |